show [node node-id] routing -
egp group group-name -
egp neighbor neighbor-name attribute [,attribute...]
all [attributes]
all characteristics
all counters
all identifiers
all status
This is supported only on Level 2 routers that support dual
routing (and, in particular, the EGP routing protocol).
1 – Characteristics
o circuit
Default: None Value: Circuit name
Simple-name of the circuit.
o ip address
Support: L2,IP
Internet address of this EGP neighbor. The value of this
characteristic is derived from the ip address argument of the
create command. You cannot modify this characteristic.
o next hop
Default: 0.0.0.0 Value: IP address
IP address and the next routing node.
o source network
Default: 0.0.0.0 Value: Network number
Network number to query.
2 – Counters
o creation time
Support: L2,IP
Time at which this entity was created.
o error messages received
Support: L2,IP
Number of EGP error messages received from this neighbor.
o error messages sent
Support: L2,IP
Number of EGP error messages sent to this neighbor.
o messages received
Support: L2,IP
Number of EGP messages received without error from this neighbor.
o messages sent
Support: L2,IP
Number of EGP messages sent to this neighbor. Note that this
value does not include EGP messages counted by the counter send
messages discarded.
o received messages discarded
Support: L2,IP
Number of EGP messages received from this neighbor with any kind
of error.
o send messages discarded
Support: L2,IP
Number of EGP messages not sent to this neighbor because of
resource limitations within the egp entity.
o start events
Support: L2,IP
Number of times the EGP neighbor has been manually started.
o stop events
Support: L2,IP
Number of times the EGP neighbor has been manually stopped.
3 – Identifier
o name
Simple name assigned to the EGP neighbor when it is created.
4 – Status
o egp state
Support: L2,IP
EGP state of the system with respect to this EGP neighbor.
acquisitionidle
cease up
down
o hello time
Support: L2,IP
Interval, in hundredths of a second, between retransmissions of
EGP Hellos. This value represents the t1 timer defined in RFC
904.
o last event
Support: L2,IP
Specifies whether the last event issued on this EGP neighbor was
a start or a stop event.
start The last event was a start.
stop The last event was a stop. This is the value with which
an EGP neighbor is created, before either a start or stop
command has been issued.
o polling mode
Support: L2,IP
Polling mode of the EGP entity with respect to this neighbor as
either active or passive.
o poll time
Support: L2,IP
Interval, in hundredths of a second, between retransmissions of
EGP polls. This value represents the t3 timer defined in RFC 904.
o state
State of the routing egp group egp neighbor entity.
off The entity is disabled.
on The entity is enabled.
o uid
Entity's unique identifier, which is generated when the entity is
created.