Use the ZERO NODE command to reset node counters on the
 executor node.

 ZERO    KNOWN NODES     COUNTERS
         NODE node-id

 All underscores found in parameters must be replaced with spaces
 when parameters are used in NCP commands.

1  –  KNOWN NODES

 Indicates that counters for all known nodes are to be reset.

2  –  NODE node-id

 Identifies a particular node for which counters are to be
 reset.

3  –  Examples

      NCP>ZERO NODE TRNTO COUNTERS

 This command resets all node counters maintained on the
 executor node for remote node TRNTO.