Displays PEDRIVER bus data.  Each bus is a local LAN device
    on the system being used for NISCACP communications.

    This is an alias of the PE LAN command.

    Format

      PE BUS

1  –  Parameters

    None.

2  –  Qualifiers

2.1    /ALL

    /ALL

    Includes all bus data.

2.2    /BUS

    /BUS=(bus1,bus2,...)

    Includes specific buses (LAN devices).  The default is all buses
    included.  Bus names are displayed by the PE BUS command.  Each
    bus name may be preceded by "NO" to exclude the bus.

    /BUS=ALL includes all buses.  /BUS=NOBUSn, equivalent to
    /BUS=(ALL,NOBUSn), includes all buses except BUSn.  /BUS=BUSn,
    equivalent to /BUS=(NOALL,BUSn) selects only BUSn.

2.3    /SUMMARY

    /SUMMARY

    Includes bus summary data.  This is the default if not other
    selection is made.

2.4    /COUNTERS

    /COUNTERS

    Includes bus counters and error data.

2.5    /n

    /n

    Includes page number n.

3  –  Example

    SDA> PE BUS/COUNTERS/BUS=EW

    Displays counters maintained by PEDRIVER for the EW devices, as
    well as the LAN device counters for the EW devices.