SCACP$HELP.HLB  —  SHOW  CIRCUIT
    Displays SCA circuit information. You can further qualify each
    node name you specify with additional parameters to uniquely
    identify a single circuit.

    Format

      SHOW CIRCUIT  nodename

1  –  Parameter 

 nodename[,...]

    Includes specific circuits to individual nodes, which you can use
    wildcards to specify.

2  –  Qualifiers

2.1    /EXCLUDE 

       /EXCLUDE=(nodename[/PORT=portname[/RSTATION=n]][,...])

    Allows you to exclude a specific circuit to a node. If multiple
    circuits to the same node exist, you can use the /PORT and
    /RSTATION qualifiers to uniquely identify the circuit.

2.2    /PORT 

       /PORT=portname[/RSTATION=n]

    If multiple circuits to the same node exist, you can use the
    /PORT and /RSTATION qualifiers to uniquely identify the circuit.
    You can use the /RSTATION qualifier only in conjunction with the
    /PORT qualifier.

3  –  Example 

  SCACP>SHOW CIRCUIT

      The command in this example displays all circuits to nodes over
      port PEA0.

         Circuit data for CLUIO2 at 07-DEC 11:55:31.80

          Node     Port   Priority   Load               Remote  Remote
          Name     Name   Cur   Mgt  Class    State     Station  Type
         -------- -------- ---- ---- -------- --------  -------  --------
         LYNX03   PEA0        0    0       10     Open      dc       NI
         CLUIO1   PEA0        0    0       10     Open      dd       NI
         PRMMC2   PEA0        0    0       10     Open      de       NI
         RXBOT1   PIB0        5    0       48     Open       4     RF72
         RXTOP1   PIB0        5    0       48     Open       1     RF73
         RXTOP0   PIB0        5    0       48     Open       0     RF73
         CLUIO1   PIB0        5    0       48     Open       7     N710
         R4JC3I   PIC0        5    0       48     Open       7     RF73
         R4HLEK   PIC0        5    0       48     Open       5     RF73
         R4XEWM   PIC0        5    0       48     Open       3     RF73
         R4A1FN   PIC0        5    0       48     Open       2     RF73
         R4XSVE   PIC0        5    0       48     Open       4     RF73
         R4VLNI   PIC0        5    0       48     Open       1     RF73

  SCACP>SHOW CIRCUIT* /PORT=PEA0

      This SHOW CIRCUIT command displays all circuits to all nodes.

         Circuit data for CLUIO2 at 07-DEC 12:42:23.03

           Node     Port              Priority    Load    Remote_Port
           Name     Name     State    Cur  Mgt    Class   Number  Type
         -------- -------- --------   ---- ---- -------- ------- --------
         LYNX03   PEA0       Open      0    0      100      dc       NI
         CLUIO1   PEA0       Open      0    0       10      dd       NI
         PRMMC2   PEA0       Open      0    0       10      de       NI
Close Help