Displays information about selected SCA ports.

    Format

      SHOW PORT  portname

1  –  Parameter

 portname[,...]

    Displays information about specific SCA ports, which you can use
    wildcards to specify. If no portname is specified, all ports on
    the node are displayed.

2  –  Qualifiers

2.1    /EXCLUDE

       /EXCLUDE=(portname[,...])

    Excludes specific port names from the display. You cannot use
    wildcards to specify port names.

2.2    /OUTPUT

       /OUTPUT=filespec

    Creates the specified file and directs the output of the command
    to this file.

3  –  Example

  SCACP> SHOW PORT

      The command in this example produces output similar to the
      following:

          Port data for CLUIO2 at 06-DEC 15:01:25.82

            Port   Mgt       Msgs       Msgs     Dgrams     Dgrams
            Name   Prio      Sent       Rcvd       Sent       Rcvd
            ------ ---- ---------- ---------- ---------- ----------
            PEA0     0      64582      92237          0          0
            PIB0     0      95276     148937          0          0
            PIA0     0          0          0          0          0
            PIC0     0      62030     115148          0          0