The SYSMAN IO FIND_WWID command probes all Fibre Channel ports,
    detects all previously undiscovered tapes and medium changers
    behind a Network Storage Router (NSR) or a Modular Data Router
    (MDR), and assigns a worldwide identifier (WWID) to each one.

    The command also displays a list of the devices and their
    assigned device names and automatically records this information
    in the SYS$SYSTEM:SYS$DEVICES.DAT file. Finally, the command
    updates relevant local and clusterwide memory structures.

    To configure newly attached Fibre Channel tapes, use this command
    prior to running the SYSMAN command IO AUTOCONFIGURE.

    You must have CMKRNL privilege to use the SYSMAN IO FIND_WWID
    command.

    For more information about Fibre Channel, see the Guidelines for
    OpenVMS Cluster Configurations.

    Format

      IO FIND_WWID

1  –  Description

    Prior to configuring a tape device on Fibre Channel ports, the
    worldwide identifier (WWID) of the device must be detected
    and stored, along with a device name, in the text file
    SYS$SYSTEM:SYS$DEVICES.DAT. You use the SYSMAN command IO FIND_
    WWID to accomplish this.

    The SYSMAN IO FIND_WWID command probes all Fibre Channel ports
    and locates all tape and medium changer devices. For tapes and
    medium changers that have not been detected by any previous
    SYSMAN IO FIND_WWID command, IO FIND_WWID assigns a device name,
    retrieves the WWID of the device, stores the device name and WWID
    data in the SYS$SYSTEM:SYS$DEVICES.DAT file, and updates memory
    structures.

    Because the main goal of SYSMAN IO FIND_WWID is to populate the
    SYS$DEVICES.DAT file, you need to invoke the SYSMAN IO FIND_
    WWID command only one time for each new device. Note that using
    the SYSMAN IO FIND_WWID command for the first time detects all
    existing tape and medium changer devices on the system at that
    time.

    Once the information is stored in the file, subsequent use of
    the SYSMAN IO AUTOCONFIGURE command reads the file and configures
    the tape and medium changer devices automatically, loading or
    connecting the device drivers as needed. The SYS$DEVICES.DAT
    file is read during each system reboot, initiating the automatic
    configuration of tapes and medium changers on the Fibre Channel.
    (SYSMAN IO FIND_WWID does not load or connect the actual device
    drivers.)

                                   NOTE

       If you add more devices to the system at a later time,
       you must powercycle the MDR to update internal mapping
       information. You must also run the SYSMAN IO FIND_WWID
       command again to append the new device information to the
       SYS$DEVICES.DAT file.

       Similarly, for the Network Storage Router (NSR), the LUN map
       must be updated.

    In an OpenVMS cluster environment, you must run the SYSMAN IO
    FIND_WWID command on each node in the cluster to update various
    data structures in memory. Alternatively, you can run SYSMAN
    IO FIND_WWID on one node, and then reboot the other nodes that
    share that same system disk, because the SYS$DEVICES.DAT file is
    read at boot time and causes memory structures to be correctly
    initialized.

    In the case of multiple system disks in the cluster, ensure that
    all copies of the SYS$DEVICES.DAT file are kept consistent,
    preferably by running the SYSMAN IO FIND_WWID command on all
    nodes. Alternatively, you can run IO FIND_WWID to update just
    one SYS$DEVICES.DAT file, and then manually edit the remaining
    SYS$DEVICES.DAT files by cutting and pasting the appropriate
    devnam/WWID records from the original file to the target files.

    HP recommends that you refrain from copying the entire original
    file to another system disk, because the SYS$DEVICES.DAT file
    is also used to define Port Allocation Classes, and PAC entries
    could be inadvertently transferred to the target system.

2  –  Example

  SYSMAN> IO FIND_WWID
  %SYSMAN-I-OUTPUT, command execution on node SAMPLE
  On port _SAMPLE$PGA0:, the following tape WWIDs and their proposed
  device names have been found but not yet configured:

        [Device $2$GGA0]
        WWID=04100024:"DEC     TL800    (C) DEC3G9CCR82A017"

        [Device $2$MGA0]
        WWID=04100022:"DEC     TZ89     (C) DECCX939S2777"

        [Device $2$MGA1]
        WWID=04100022:"DEC     TZ89     (C) DECCX942S6295"

      This is a configuration example using a TL891 tape library. The
      SYSMAN command IO FIND_WWID displays a list of all previously
      undiscovered tape devices and their device names.

      Note that the overall WWID consists of everything to the right
      of the equal sign. Each such WWID is unique; however, the
      header portion might not be unique, because the header reflects
      only the basic type and length of the the WWID data.

      The SYSMAN IO FIND_WWID command automatically records
      the information about the new tape devices in
      SYS$SYSTEM:SYS$DEVICES.DAT:

        $ TYPE SYS$SYSTEM:SYS$DEVICES.DAT
        !
        ! Updated 23-OCT-2002 14:17:41.85:  DEC TL800
        !
        [Device $2$GGA0]
        WWID=04100024:"DEC     TL800    (C) DEC3G9CCR82A017"
        !
        !
        ! Updated 23-OCT-2002 14:17:41.93:  DEC TZ89
        !
        [Device $2$MGA0]
        WWID=04100022:"DEC     TZ89     (C) DECCX939S2777"
        !
        !
        ! Updated 23-OCT-2002 14:17:42.01:  DEC TZ89
        !
        [Device $2$MGA1]
        WWID=04100022:"DEC     TZ89     (C) DECCX942S6295"
        !

      You would then use the SYSMAN command IO CONFIGURE to configure
      these devices. After you completed this step, the SHOW
      DEVICE/FULL command would display the worldwide identifier
      of the tape.