Displays information in the configuration database which sets the
    parameters for ICMP, IP, TCP, and UDP when TCP/IP Services starts
    up.

    Related commands: SET CONFIGURATION PROTOCOL, SET PROTOCOL

    Format

      SHOW CONFIGURATION PROTOCOL  [ protocol ]

                                   [ /PARAMETERS ]

1  –  Parameters

 protocol

    Optional. Default: All protocols.

    Specify one of the following: ICMP, IP, TCP, UDP.

2  –  Qualifiers

2.1    /PARAMETERS

    Optional.

    Shows parameter settings. You can specify any protocol.

3  –  Examples

    1.TCPIP> SHOW CONFIGURATION PROTOCOL

      ICMP
        Redirect:               enabled
        Unreachable:           disabled

      IP
        Forward:               disabled

        Reassembly timer:             0

      TCP
        Delay ACK:              enabled
        Window scale:           enabled
        Drop count:                   0
        Probe timer:                  0

                                Receive                Send

        Push:                  disabled            disabled
        Quota:                        0                   0

      UDP
        Unpriv. broadcast:     disabled

                                Receive                Send

        Checksum:               enabled             enabled
        Quota:                        0                   0

      Displays information in the configuration database.