Displays the permanent or volatile routes database. To display
    the permanent database, use the /PERMANENT qualifier.

    Looks up the destination you specify first in the hosts database
    and then, if this lookup fails, in the networks database.

    Displays the following routes and their types:

    o  A - Active route (created manually or associated with an
       interface)

    o  D - Dynamic route (created by ROUTED or GATED routing daemon)

    o  H - Host route (a route to a host)

    o  N - Network route (a route to a network)

    o  P - Permanent (from the routes database)

    Related command: SET ROUTE

    Format

      SHOW ROUTE  [ destination ]

                  [ /FULL ]

                  [ /GATEWAY=host ]

                  [ /LOCAL ]

                  [ /OUTPUT=file ]

                  [ /PERMANENT ]

1  –  Restrictions

    Requires read access to the routes database.

2  –  Parameters

 destination

    Optional. Default: Displays all routes.

    Destination host.

3  –  Qualifiers

3.1    /FULL

    Optional. Default: Displays routes as specified in the routes
    database.

    Displays mapping between destination addresses and names and
    gateway addresses and names.

3.2    /GATEWAY

       /GATEWAY=host

    Optional. Default: All gateways.

    Displays information for the specified host that performs as a
    gateway.

3.3    /LOCAL

    Optional. Default: The command checks the hosts database; if a
    lookup fails, it checks the BIND resolver.

    Limits name-to-address lookups to the local hosts database.

3.4    /OUTPUT

       /OUTPUT=file

    Optional. Default: Screen display.

    Sends output to the specified file.

3.5    /PERMANENT

    Optional.

    Displays only the permanent routes database.

    o  If TCP/IP Services is running and you omit /PERMANENT, the
       volatile database is displayed.

    o  If TCP/IP Services is not running, the permanent database is
       displayed.

4  –  Examples

    1.TCPIP> SHOW ROUTE

                                   DYNAMIC

      Type           Destination                           Gateway

      AN    0.0.0.0                               16.20.0.173
      AN    16.20.0.0/16                          16.20.208.100
      AH    16.20.208.100                         16.20.208.100
      AH    127.0.0.1                             127.0.0.1

      Displays all defined routes.

    2.TCPIP> SHOW ROUTE "robin"

      Displays the network route to host robin.