Resets the link, node, and service counters maintained by the
    local node. You must have OPER privilege to use this command.

    Format

      ZERO COUNTERS

1  –  Qualifiers

1.1    /LOG

       /LOG
       /NOLOG

    Specifies whether LATCP displays a message confirming that the
    counters were reset. If you do not specify the /LOG or /NOLOG
    qualifier, the default is that no message will be displayed.

1.2    /LINK

       /LINK[=link-name]

    Specifies the link (on your local node) for which you want
    counters reset. If you do not specify a link name, LATCP zeroes
    counters for the link LAT$LINK.

1.3    /NODE

       /NODE[=node-name]

    Specifies the node for which you want counters reset. If you do
    not specify a node name, LATCP zeroes the counters for your local
    node.

1.4    /PORT

       /PORT=port-name

    Specifies the port (on your local node) for which you want
    counters reset.

1.5    /SERVICE

       /SERVICE=service-name

    Specifies the service (on your local node) for which you want
    counters reset.

2  –  Example

  LATCP> ZERO COUNTERS/SERVICE=LTVM
  LATCP> SHOW SERVICE LTVM /COUNTERS

  Service Name:  LTVM

  Seconds Since Zeroed:     9
  Connections Attempted:    0    Connections Accepted:     0
  Connections Completed:    0    Connections Rejected:     0

      The ZERO COUNTERS command in this example resets the counters
      kept for service LTVM. The display produced by the SHOW SERVICE
      command shows how the ZERO COUNTERS command reset the counters
      to zero.