show qllc link The show qllc link command displays the attributes for the QLLC Link subentity. The QLLC Link subentity defines the data link attributes that are shared by its Station subentities. Ex, ncl> show qllc link qllc-0 all status
1 – Identifier
Name Displays the name of the Link.
2 – Status
UID Displays the entity's unique identifier, which is
generated when the Peer Server creates the entity.
State Displays the operational state of this QLLC Link
subentity.
inoperable The Link cannot be enabled.
off You have issued a disable command for this Link.
The Link is in the Inactive or Pending Inactive
state.
on You have issued an enable command for this Link.
3 – Characteristics
Subsequent 1-8 characters Displays an octet string that is used
Protocol (hexadecimal) to filter incoming X.25 calls for a
Identifier specific protocol. This value corres-
ponds to the Call Data value in the
X.25 configuration. It is only needed
to handle incoming connections.
Filter Simplename Displays the name of the Filter to be
Name used for incoming QLLC (X.25) connec-
tions. This name must be specified
for links that will use both incoming
or outgoing connections. The name
must also match an X25 Access Filter
that exists in the node's
X.25 configuration.
Template Simplename Displays the name of the Template to
Name be used for creating an outbound QLLC
connection.This name must match an X25
Access Template in the node's X.25
configuration.
DTE Class Simplename Displays the name of the DTE class to
be used for creating an outbound
connection. This name must match an
X25 Access DTE Class names that exists
in the local node's X.25 configuration.
4 – Counters
Creation Time Displays the time that the QLLC Link subentity
was created.