Use the SHOW CIRCUIT command to display circuit information (from  the
 volatile database) available to the executor node. Use the LIST CIRCUIT
 command to display circuit information (from  the  permanent  database)
 available to the executor node.

 SHOW    ACTIVE CIRCUITS     CHARACTERISTICS         ADJACENT NODE node-id
 LIST    KNOWN CIRCUITS      COUNTERS                TO file-id
         CIRCUIT circuit-id  STATUS
                             SUMMARY

 All underscores found in parameters must be replaced with spaces
 when parameters are used in NCP commands.

1  –  ACTIVE CIRCUITS

 Indicates that information for all active circuits is to be
 displayed.

2  –  KNOWN CIRCUITS

 Indicates that information for all known circuits is to be
 displayed.

3  –  CIRCUIT circuit-id

 Identifies a particular circuit for which information is to be
 displayed.

4  –  ADJACENT NODE node-id

 Indicates that the display of a list of circuits is to be
 restricted to those circuits leading to the specified
 adjacent node.

5  –  Examples

      NCP>SHOW CIRCUIT DMC-0 COUNTERS

          This command displays circuit counter information for
 	 circuit DMC-0 on the SYS$OUTPUT device.

      NCP>SHOW ACTIVE CIRCUITS

          This command displays circuit status information for
 	 all  circuits that are in the ON state.