Use the SHOW LINE  command  to  display  line  information  (from  the
 volatile  database)  available to the executor node.  Use the LIST LINE
 command to display line information (from  the  permanent  database)
 available to the executor node.

 SHOW    ACTIVE LINES    CHARACTERISTICS         TO file-id
 LIST    KNOWN LINES     COUNTERS
         LINE line-id    STATUS
                         SUMMARY

 All underscores found in parameters must be replaced with spaces
 when parameters are used in NCP commands.

1  –  ACTIVE LINES

 Indicates that information for all active lines is to be
 displayed.

2  –  KNOWN LINES

 Indicates that information for all known lines is to be
 displayed.

3  –  LINE line-id

 Identifies a particular line for which information is to be
 displayed.

4  –  Examples

      NCP>SHOW LINE DMC-0 COUNTERS

          This command displays line counter information for line DMC-0
          on the SYS$OUTPUT device.

      NCP>SHOW ACTIVE LINES

          This command displays line status information for  all  lines
          that are in the ON state.