Use the SHOW LOGGING command to display logging information (from  the
 volatile database) available to the executor node.  Use the LIST
 LOGGING command to display logging information (from the permanent
 database) available to the executor node.

 SHOW    ACTIVE LOGGING   CHARACTERISTICS TO file-id
 LIST    KNOWN LOGGING    EVENTS          SINK NODE node-id
         LOGGING CONSOLE  STATUS          KNOWN SINKS
         LOGGING FILE     SUMMARY
         LOGGING MONITOR

 All underscores found in parameters must be replaced with spaces
 when parameters are used in NCP commands.

1  –  ACTIVE LOGGING

 Indicates that information for all active logging is to be
 displayed.

2  –  KNOWN

 Introduces a plural parameter or component.

2.1  –  LOGGING

 Indicates that information for all known logging is to be
 displayed.

2.2  –  SINKS

 Indicates that information for all known sinks is to be
 displayed.  If unspecified, only the executor node
 is displayed.

3  –  CONSOLE

 Indicates that information for the logging console is to be
 displayed.

4  –  FILE

 Indicates that information for the logging file is to be
 displayed.

5  –  MONITOR

 Indicates that information for the logging monitor is to be
 displayed.

6  –  SINK NODE node-id

 Identifies a particular sink node for which information is
 to be displayed.

7  –  Examples

      NCP>SHOW KNOWN LOGGING KNOWN SINKS

          This command displays  logging  status  information  for  all
          known logging at all known sinks.

      NCP>SHOW LOGGING FILE EVENTS SINK NODE TRNTO

          This command displays events that are currently being  logged
          to the logging file at node TRNTO.