An FDDI Station entity represents an access point to the service offered
   by the FDDI module.  The FDDI data link can be monitored and controlled
   through DNA network management.

1  –  character

     COMMUNICATION PORT

         Name of the hardware port associated with this station, taken from
         the corresponding argument in the create directive. You cannot
         modify this characteristic.

     SMT MAXIMUM VERSION ID

         Highest SMT version ID this station supports.  You cannot modify
         this characteristic.

     SMT MINIMUM VERSION ID

         Lowest SMT version ID this station supports. You cannot modify this
         characteristic.

     SMT STATION ID

         SMT station ID for this station. You cannot modify this
         characteristic.

     SMT VERSION ID

         Currently active SMT version ID for this station. You cannot modify
         this characteristic.

     TYPE

         SMT station type for this station. You cannot modify this
         characteristic.

2  –  counters

   Unless stated otherwise, counts include both normal and multicast traffic
   and all protocol types, service access points SAPs, and protocol
   identifiers.

     CONFIGURATION CHANGES

         Number of times the internal configuration of this station changed.
         Not present in single attached stations SAS.

     SELFTEST FAILURES

         Total number of times a self-test of the station detected an error.

     TRACES RECEIVED
         Number of times the ECM state machine for this station entered the
         trace state due to a received trace signal.

3  –  status

     LAST SET STATION ID

         The station ID of the station that last performed an SMT
         Change/Add/Remove PMF frame operation.

     STATE

         Operational state of the station.