A routing egp group egp neighbor entity defines one of the systems in the
   autonomous group defined by the owning egp group entity.  This entity is
   supported only on level 2 routers that support dual routing and, in
   particular, the EGP routing protocol.

1  –  character

     CIRCUIT

         Simple-name of the circuit.

     IP ADDRESS
         Support: L2,IP

         Internet address of this EGP neighbor. The value of this characteristic
         is derived from the ip address argument of the create command. You
         cannot modify this characteristic.

     NEXT HOP
         Default: 0.0.0.0                       Value: IP address

         IP address and the next routing node.

     SOURCE NETWORK
         Default: 0.0.0.0                       Value: Network number

         Network number to query.

2  –  counters

     ERROR MESSAGES RECEIVED
         Support: L2,IP

         Number of EGP error messages received from this neighbor.

     ERROR MESSAGES SENT
         Support: L2,IP

         Number of EGP error messages sent to this neighbor.

     MESSAGES RECEIVED
         Support: L2,IP

         Number of EGP messages received without error from this neighbor.

     MESSAGES SENT
         Support: L2,IP

         Number of EGP messages sent to this neighbor.  Note that this value
         does not include EGP messages counted by the counter send messages
         discarded.

     RECEIVED MESSAGES DISCARDED
         Support: L2,IP

         Number of EGP messages received from this neighbor with any kind of
         error.

     SEND MESSAGES DISCARDED
         Support: L2,IP

         Number of EGP messages not sent to this neighbor because of resource
         limitations within the egp entity.

     START EVENTS
         Support: L2,IP

         Number of times the EGP neighbor has been manually started.

     STATE CHANGES FROM UP
         Support: L2,IP

         Specifies the number of times the EGP state of this neighbor changed
         from Up to some other state.

     STATE CHANGES TO UP
         Support: L2,IP

         Specifies the number of times the EGP state of this neighbor changed
         to Up from some other state.

     STOP EVENTS
         Support: L2,IP

         Number of times the EGP neighbor has been manually stopped.

3  –  status

     EGP STATE
         Support: L2,IP

         EGP state of the system with respect to this EGP neighbor.

         ACQUISITION   IDLE
         CEASE         UP
         DOWN

     HELLO TIME
         Support: L2,IP

         Interval, in hundredths of a second, between retransmissions of EGP
         Hellos. This value represents the t1 timer defined in RFC 904.

     LAST EVENT
         Support: L2,IP

         Specifies whether the last event issued on this EGP neighbor was a
         start or a stop event.

         START - The last event was a start.
         STOP  - The last event was a stop.

         This is the value with which an EGP neighbor is created, before either
         a start or stop command has been issued.

     POLLING MODE
         Support: L2,IP

         Polling mode of the EGP entity with respect to this neighbor as either
         active or passive.

     POLL TIME
         Support: L2,IP

         Interval, in hundredths of a second, between retransmissions of EGP
         polls. This value represents the t3 timer defined in RFC 904.

     STATE

         State of the routing egp group egp neighbor entity.

          ON  - The entity is enabled.
          OFF - The entity is disabled.