Displays information about the SAS Controller.

    Format

      SHOW CONTROLLER  [device_name]

1  –  Parameters

 device_name: (OPTIONAL)

    The device name is an SAS device name used to display information
    about a specific controller. The device name has the format ddcu,
    where:

    dd       is the device code.
    c        is the controller designation A through Z.
    u        is the unit number (0 through 9999).

    If you do not specify a device name, all controllers are
    displayed.

2  –  Qualifiers

2.1    /DEFAULT

    Displays information about the default controller.

2.2    /FULL

    Displays additional information about the SAS Controller.

3  –  Example

     SAS> SHOW CONTROLLER

     A default controller is not set.  All matching controllers displayed.

  Adapter: _PKA0:
  Controller Type      : SAS LSISAS1068
  Firmware version     : 1.10.0.0
  SAS WWID             : 500605B0-00001A20
  RAID Capabilities    RAID 0 (Integrated Striping) supported.
                       RAID 0+1 (Integrated Mirroring Enhanced) supported.
                       RAID 1 (Integrated Mirroring) supported.
  Active IR Volumes    : 1 of 2
  Active PHYS disk     : 3 of 10
  Cache:
   Not Available.
  Battery:
   Not Available.

      This example shows SAS Controller information.