Displays information about the SAS enclosure connected to the SAS
    Controller.

    Format

      SHOW ENCLOSURE  [encl_id]

1  –  Parameters

 encl_id

    Displays information about a specific SAS enclosure.

    If the enclosure ID is not specified, the SAS utility displays
    information about all available enclosures that the SAS
    Controller finds.

2  –  Qualifiers

2.1    /FULL

    Displays additional information about SAS enclosures.

3  –  Example

     SAS> SHOW ENCLOSURE

  Enclosure 1
          Encl WWID       : 500605B0-00001A20
          Num slots       : 8
          Start slot      : 1
          Encl Flags      SEP BUS/Target ID is not valid.
                          Start BUS/Target ID is not valid.
                          IOC (direct attached) SGPIO.

      This example shows information about internal Enclosure 1
      connected to the SAS Controller.