Applies only to tape devices on Fibre Channel. Lists all tape
    device WWIDs that are not yet configured on Fibre Channel.

    You can use the output of this command as input to the SYSMAN IO
    CREATE_WWID and SYSMAN IO REPLACE_WWID commands.

    Format

      IO LIST_WWID

1  –  Example

  SYSMAN> IO LIST_WWID
  %SYSMAN-I-OUTPUT, command execution on node ROCKY

  On port _
 ROCKY$PGA0:, the following tape WWIDs are not yet configured:

  Target 3, LUN 1, COMPAQ   SuperDLT1
  WWID=02000008:500E-09E0-0005-30D7

  Target 3, LUN 3, COMPAQ   SDX-500C
  WWID=0C000008:0800-4606-C00D-473F

  Target 4, LUN 1, COMPAQ   SuperDLT1
  WWID=02000008:500E-09E0-0005-30D7

  Target 4, LUN 3, COMPAQ   SDX-500C
  WWID=0C000008:0800-4606-C00D-473F

      In this example, each drive is listed twice because the tape
      bridge is dual-ported, with one FC port at target 3 and the
      other FC port at target 4.