This command is for use on Alpha and Integrity servers only.
It displays information about device drivers loaded into the
system, the devices connected to them, and their I/O databases.
All addresses are in hexadecimal and are virtual.
On VAX systems, use the SYSGEN command SHOW/DEVICE.
Format
IO SHOW DEVICE
1 – Description
The SYSMAN IO SHOW DEVICE command displays information about the
device drivers loaded into the system, the devices connected to
them, and their I/O databases.
The SYSMAN IO SHOW DEVICE command specifies that the following
information be displayed about the specified device driver:
Driver Name of the driver
Dev Name of each device connected to the driver
DDB Address of the device's device data block
CRB Address of the device's channel request block
IDB Address of the device's interrupt dispatch block
Unit Number of each unit on the device
UCB Address of each unit's unit control block
All addresses are in hexadecimal and are virtual.
For additional information about SYSMAN, see A Comparison of
System Management on OpenVMS AXP and OpenVMS VAX (archived) but
available on the OpenVMS Documentation CD-ROM) and the HP OpenVMS
System Manager's Manual.
2 – Example
SYSMAN> IO SHOW DEVICE
The following example is a sample display produced by the
SYSMAN IO SHOW DEVICE command:
__Driver________Dev_DDB______CRB______IDB______Unit_UCB_____
SYS$FTDRIVER
FTA 802CE930 802D1250 802D04C0
0 801C3710
SYS$EUDRIVER
EUA 802D0D80 802D1330 802D0D10
0 801E35A0
SYS$DKDRIVER
DKI 802D0FB0 802D0F40 802D0E60
0 801E2520
SYS$PKADRIVER
PKI 802D1100 802D13A0 802D1090
0 801E1210
SYS$TTDRIVER
OPERATOR
NLDRIVER
SYS$TTDRIVER, OPERATOR, and NLDRIVER do not have devices
associated with them.