1    /FILE

       /FILE=file

    Optional.

    Specifies the name of the client's system image or other file to
    download upon request.

    o  By default, upon receiving a request, BOOTP looks for this
       file in TCPIP$TFTP_ROOT:[host], where host is the client's
       host name, excluding the domain.

    o  If this directory does not exist, BOOTP uses:

       TCPIP$TFTP_ROOT:[000000].

    o  When the TCP/IP Services software receives a boot request,
       BOOTP verifies the existence and size of this file.

2    /GATEWAYS

       /GATEWAYS=hosts
       /NOGATEWAYS=hosts

    Optional. Default: None.

    Specifies the gateways used for routing.

3    /HARDWARE

       /HARDWARE=ADDRESS=hex_addr

    Required.

    Specifies the client's hardware address. For hex_addr, specify:
    hh-hh-hh-hh-hh-hh.

4    /NETWORK_MASK

       /NETWORK_MASK=IP_address

    Required if you use subnets; otherwise optional.

    Specifies the part of the host field of an IP address identified
    as the subnet.

    The software calculates the default by setting the following:

    o  The bits representing the network field to 1

    o  The bits representing the host field to 0

    You can divide the host field into a site-specific subnetwork
    and a host field. If you use subnets, you must specify a subnet
    field.

5    /SERVERS

       /SERVERS=type=host

    Optional.

    Specifies other servers whose names BOOTP can supply to clients.
    Here, host specifies a host name or IP address and type can be
    one or more of the following:

    [NO]COOKIE         Cookie server
    [NO]IEN_NAME       IEN-116 name server
    [NO]IMPRESS        Impress network image server (IMAGEN)
    [NO]LPR            Berkeley 4BSD print server
    [NO]LOG            MIT-LCS UDP logging server
    [NO]NAME           BIND name server
    [NO]RESOURCE       Resource Location Protocol
                       (RLP) server (RFC-887)
    [NO]TIME           Internet time server (RFC-868)

6    /TIME_OFFSET

       /TIME_OFFSET=seconds

    Optional. Default: 0 seconds.

    Specifies the time difference, in seconds, between the client's
    time zone and Universal Coordinated Time (UTC) expressed in
    seconds. This value is zero (0) in the British Isles and parts
    of Europe, a positive number for locations east of the zero
    meridian, and a negative number for locations west of the zero
    meridian.